Product Description
Water Ionizer BionTech BTM800
This alkaline water ionizer performs a filtration procedure which eliminates a major portion of both organic and inorganic contaminants. This is done using silver impregnated carbon to make sure that the filtration process eradicates as many harmful compounds as possible, leaving a filtered water which is ready for ionization.
The water ionizers then ionizes the water in a compartment that contains a number of electrodes that are negatively charged which attracts the positive ions in your water. This water is loaded with negative ions, therefore turning it into alkaline water which is has widereaching health benefits. Ionized or alkaline water is very beneficial and healthy for us because it assists our body-s pH to gradually move down to the optimal pH which is a little alkaline. Among many other benefits, increased alkalinity of the water assists the body to eliminate toxins that accumulate within our body.
The Biontech electrodes can be placed in vinegar once a month for 4 hours and they will last years.
| Water supply method | Direct link to tap water |
| Body (Size) | 280x340x140(WxHxD)m/m |
| (Weight) | About 4.5Kg |
| Water pressure available | 0.7~6.0kgf/cm2 |
| Temperature available | 5°C~35°C |
| Overheat-prevention device | Two built-in temp. sensor (auto reset) |
| Electrolysis method | Continuous |
| Creation capacity | 2.5ltr/min. (at water pressure of 2kgf/cm2) included alkaline water and acidic water |
| Electrolysis stage | 5 steps for alkaline water/ 2 step for acidic water |
| Electrolytic cleaning | Auto washing (time: about 30 sec., amount of supplied water: about 0.8ltr) |
| Electrode | Platinized titanium |
| Purification device | Cartridge method (2 stages) |
| Filter replacement | About 4 months (when 20ltr of water is provided a day) |
| Life display | FND text display |
| Filter material | Nonwoven, pp filter, GAC, silver-added active carbon, calcium sulfite, block carbon, U/F membrane filter |
| Operation indication | Sound |
| Water inflow control function | Installed as a supplementary |
| Medical Device Item Approval | KFDA No. 889 |
| Item Approval | No. 05-217 |
Bion-Tech is a quality certified company.
U.S. safety certification
U.S. safety standard
ISO 9001
European quality standard
Patent Office
Specifications
FAQs
How does a water ioniser work?
The BTM200 performs a filtration procedure which eliminates a major portion of both organic and inorganic contaminants, including chlorine, insecticides, pesticides, hormones, harmful bacteria and viruses. This leaves the filtered water ready for ionisation.
The filtered water is ionised in a compartment that contains two platinised titanium electrodes. A negatively charged electrode attracts the positively charged ions in the water. This results in the water having a high concentration of negative ions, therefore turning it into alkaline water with its wide-reaching health benefits.
The pH of our blood, saliva and spinal fluid is slightly alkaline, maintaining a pH level close to 7.4. Almost all of us have a diet that is too acidic, so by drinking alkaline water we are assisting our body to maintain its correct pH.
Even a slight variation in our body’s optimal pH level will lead to illness, disease, premature ageing and even death. Thus, alkaline ionised water is very beneficial and healthy for us - among many other benefits, increased alkalinity of the water can have an antioxidant effect and assist the body to eliminate toxins.
What types of ionised water does the BTM200 produce?
The BTM200N water ionizer has 5 levels of alkaline water and 2 levels of acid water.
What’s the cost of replacement filters?
Replacement filters cost $79 and last for approximately 2400 litres.
Do I need a plumber to install the unit?
No, the BTM200 is easily installed by connecting to the tap.
How does the self-cleaning function work, does it clean every time it’s used?
The self-clean function operates after every 10 litres of ionised water is dispersed.
Product Reviews
